Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Weight | 0.15 lb (0.07 kg) |
| Tool sheet | TS-H800, Rev. F, 22 Jan 16 |
Part numbers
| Part no. | Size |
|---|---|
| H800 | Pulling head |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryMAX, CherryMAX AB | -4, -5, -6 | except 6 all aluminum; also Blindbolt S -04/-05, MBC Lock Creator -4/-5/-6, NAS1900 U -4/-5 (782-456, 701B18, 753A14A standard) |
Riveters
| Riveter | Adapter | Note |
|---|---|---|
| G800 | — | hand riveter |
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws | Jaw follower |
|---|---|---|---|---|
| As supplied | -4, -5, -6 (S: -04/-05; U: -4/-5) | 782-456 | 701B18 | 753A14A |
| CherryLOCK 'A' Code | -4 | 886-004 | 701B18 | 753A14A |
| CherryLOCK 'A' Code | -5 | 886-005 | 701B18 | 753A14A |
| NAS1900 (no shift washer) | -4 | 782-4NAS | 701B18 | 753A14A |
| NAS1900 (no shift washer) | -5 | 782-5NAS | 701B18 | 753A14A |
| Blindbolt 'U' Type | -05 | 782-5BB | 701B18 | 753A14A |
| Standard MBC | -4 | 783-4MBC | 701B18 | 753A14A |
| Standard MBC | -5 | 782-5MBC | 701B18 | 753A14A |
| CherryLOCK 'A' Code | 3 | 886-003 | 701B18 | 753A14A |
| Extended 3 dia. CherryLOCK 'A' Code (see Fig. 3) | 3 | 782-3E | 701B18 | 753A14A |
| 3/32" SPR & -3 pull thru NP Rivets | 3 | 782-3 | 701B18 | 753A14A |
| CherryLOCK 'A' Code | 6 | 886-006 | 782-010 | 886-002 |
| Standard MBC | -6 | 782-6MBC | 782-010 | 886-002 |
| CherryMAX 'AB' -6 Alum; NAS1900 'U' Type -4, -5, -6 | -6 (AB); -4,-5,-6 (U) | 782-6AL | 782-010 | 886-002 |
| NAS1900 (no shift washer) | -6 | 782-6NAS | 782-010 | 886-002 |
Cherry's Table 1. Change these parts to install the other fasteners.
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 782-456 | Nosepiece (see table 1) | 1 |
| 2 | 800-033 | Sleeve | 1 |
| 3 | 671A16 | Jam Nut | 1 |
| 4 | 753A13A | Collet | 1 |
| 5 | 701B18 | Jaw Set (see table 1) | 1 |
| 6 | 753A14A | Jaw Follower (see table 1) | 1 |
| 7 | 800-032 | Drawbar | 1 |
| 8 | 753A15 | Stem Stop | 1 |
| 9 | P-1483 | Compression Spring | 1 |
Notes from the maker
- Items in red marked * (782-456, 701B18, 753A14A) are standard and provided with the pulling head.
- Jaws must be adjusted to allow front ejection of the spent stem.
- Items 1, 5 & 6 are fastener type and size dependent.
- Clean and inspect nosepiece, jaws, collet & spring every 1000 installations or whenever a failure occurs; replace spring and jaws if worn. Lubricate outside of jaws with Lubriplate or similar light grease. Pay attention to position/orientation of Stem Stop (item 8). Loctite 242 (removable) on all threaded components except as shown (do not apply on marked threads).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H800, Rev. F, 22 Jan 16 — Compact Universal Straight Pulling Head for the G800 riveter
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.