Specification
Where to buy| Item | Value |
|---|---|
| Type | Pneumatic-hydraulic riveter with hydraulic piston return |
| Maker | Cherry Aerospace |
| Air pressure | 90 psi (6.2 bar) min., 110 psi (7.6 bar) max. in CA-1001; 90 to 100 psi (6.2 to 6.89 bar) in TM-G84 |
| Stroke | 0.562 in (14.27 mm) |
| Pulling force | 5,750 lb (25.58 kN) at 90 psi in CA-1001, at 100 psi in TM-G84; 1,200 lb (5.34 kN) on return stroke |
| Item | Value |
|---|---|
| Weight | 7.70 lb (3.49 kg) |
| Noise level | Less than 80 dB(A) |
| Vibration | Less than 2.5 m/s² |
| Air consumption | 0.29 SCF/cycle (8.21 L/cycle) |
| Mounting system | Bayonet, common to the G83A and G84 (compatible with Huck 230, 362 models) |
Part numbers
| Part no. | Size | Item |
|---|---|---|
| G84 | Riveter | Riveter only |
Cherry's part numbers for this tool, as the catalog lists them.
Pulling heads
| Fastener | Type | Part number | Adapter | Diameter |
|---|---|---|---|---|
| MAXIBOLT, S type | Straight | H83B-5MB | — | -05 |
| MAXIBOLT, U type | Straight | H83B-5MBU | — | -05 |
| MAXIBOLT, S type | Straight | H83B-6MB | — | -06 |
| MAXIBOLT, U type | Straight | H83B-6MBU | — | -06 |
| MAXIBOLT, S type | Straight | H84A-8MB | — | -08 |
| MAXIBOLT, U type | Straight | H84A-8MBU | — | -08 |
| MAXIBOLT | Offset | H856-6MB | 744-200 | -06 |
| MAXIBOLT, S type | Right angle | H829-5MB | — | -05 |
| MAXIBOLT, U type | Right angle | H829-5MBU | — | -05 |
| MAXIBOLT, S type | Right angle | H829-6MB | — | -06 |
| MAXIBOLT, U type | Right angle | H829-6MBU | — | -06 |
| Fastener | Type | Part number | Adapter | Diameter |
|---|---|---|---|---|
| MAXIBOLT, S type | Right angle | H829-8MB | — | -08 |
| MAXIBOLT, U type | Right angle | H829-8MBU | — | -08 |
| Lockbolt | Straight | H513, H513S, H513SR | — | -4, -5, -6, -8 |
| Lockbolt | Offset | H563-4B, -5B, -6B | — | -4, -5, -6 |
| Lockbolt | Offset | H562-6B, -8B | 744-100 | -6, -8 |
| MAXIBOLT PLUS | Straight | H84B-568 | — | -5, -6, -8 |
| MAXIBOLT PLUS | Right angle | H829-56MBPS | — | -5, -6 |
| NAS1919/1921 | Straight | H1900-456 | — | -4, -5, -6 |
| CherryMAX | Straight | H84A-8 | — | -8 |
| CherryMAX | Right angle | H829-8 | — | -5, -6, -8 |
| CherryMAX 'AB', CherryLOCK 'A' | Straight | H84-8CLA | — | -8 |
Other pulling heads may be used with the adapters below. Pulling heads are not furnished with the riveter.
Adapters
All three require removal of the bayonet mount.
Notes from the maker
- Pulling heads are not furnished with the riveter and must be ordered separately.
- Cherry's catalog and manual rate the force at different pressures: both are shown.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Fastening Systems for Aerospace Tool Catalog CA-1001, p. 7, 8 — Specifications, pulling heads and part numbers.
- Cherry Aerospace, Tool Manual TM-G84, Rev. H, 5/5/15 — Specifications, operation, pulling heads and maintenance.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.