The Aviation Point
The Aviation PointTechnical data sheet · theaviationpoint.com/parts/spacers/ms35489/

MS35489 — rubber grommet

Grommet, Plastic: dimensions by dash number with the AN931 alternate number, as listed in a distributor catalogue.

View PDF

MS35489 at a glance

Where to buy
MS35489, grommet, plastic
MS35489

Specification

ItemValue
TypeGrommet
MaterialSynthetic rubber (no code after the dash number) or silicone rubber (X after the dash number)
StatusCurrent designation of the grommet that carries the legacy AN931 number. Confirm the current issue before design use.

Part numbers

Part numbers commonly stocked. The standard governs and may list others.

.1256 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-140—.125.188.312.188
MS35489-1—.125.250.344.188
MS35489-2AN931-2-9.125.562.750.188
MS35489-3AN931-2-16.1251.0001.250.250
MS35489-3X—.1251.0001.250.250
MS35489-142—.125.250.344.218

.1887 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-4AN931-3-5.188.312.438.188
MS35489-4X—.188.312.438.188
MS35489-134AN931-3-9.188.562.750.188
MS35489-134X—.188.562.750.188
MS35489-5AN931-3-10.188.625.875.188
MS35489-33AN931-A3-5.188.312.438.250
MS35489-34AN931-A3-10.188.625.875.250

.2508 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-6AN931-4-7.250.438.625.188
MS35489-7AN931-4-12.250.7501.000.250
MS35489-8AN931-4-16.2501.0001.250.250
MS35489-8X—.2501.0001.250.250
MS35489-35AN931-A4-7.250.438.625.250
MS35489-36AN931-A4-12.250.7501.000.312
MS35489-64AN931-B4-7.250.438.625.312
MS35489-93AN931-C4-7.250.438.625.375

.3125 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-9AN931-5-9.312.562.812.312
MS35489-10AN931-5-12.312.7501.000.312
MS35489-118AN931-5-13.312.8121.062.312
MS35489-38AN931-A5-9.312.562.812.375
MS35489-39AN931-A5-12.312.7501.000.375

.3756 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-141—.375.500.656.250
MS35489-11AN931-6-10.375.625.875.312
MS35489-12AN931-6-16.3751.0001.250.250
MS35489-40AN931-A6-10.375.625.875.375
MS35489-41AN931-A6-16.3751.0001.250.312
MS35489-69AN931-B6-10.375.625.875.438

.4382 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-13AN931-7-11.438.688.938.312
MS35489-42AN931-A11-16.438.688.938.375

.5006 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-149—.500.7501.000.250
MS35489-14AN931-8-13.500.8121.062.312
MS35489-14X—.500.8121.062.312
MS35489-15AN931-8-20.5001.2501.500.250
MS35489-150—.500.7501.000.281
MS35489-43AN931-A8-13.500.8121.062.375

.5621 part number

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-16AN931-9-13.562.8121.062.312

.6252 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-17AN931-10-14.625.8751.125.312
MS35489-18AN931-10-20.6251.2501.500.250

.6882 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-19AN931-11-16.6881.0001.312.375
MS35489-48AN931-B2-9.6881.0001.312.438

.7504 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-20AN931-12-17.7501.0621.375.375
MS35489-135AN931-12-20.7501.2501.625.250
MS35489-21AN931-12-23.7501.4381.812.375
MS35489-50AN931-A12-23.7501.4381.812.438

.8752 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-22AN931-14-20.8751.2501.625.438
MS35489-121AN931-14-26.8751.6252.000.438

1.0003 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-23AN931-16-221.0001.3751.750.438
MS35489-24AN931-16-301.0001.8752.250.438
MS35489-52AN931-A16-221.0001.3751.750.500

1.5002 part numbers

Part no.AN931 alternateB hole, inC groove, inA outside, inF, in
MS35489-27AN931-24-281.5001.7502.125.438
MS35489-56AN931-A24-281.5001.7502.125.500

Part number

What each code means

PartMeaning
FormatMS35489-<dash>
XSuffix: Silicone rubber (X after the dash number); no code: synthetic rubber
ExampleMS35489-2 — .125 in hole, .562 groove, .750 outside

Notes from the standard

  • Dimensions as listed, in inches: B is the panel hole, C the groove diameter, A the outside diameter, F the dimension marked F on the drawing.
  • No code after the dash number: synthetic rubber. X after the dash number: silicone rubber.
  • -48 is listed against AN931-B2-9 with a .688 hole; the AN931 B-series numbers do not follow the hole size of -2-9 and are given as printed.

Where to buy

AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Keep going

Calculators

CalculatorPart Number Equivalent Cross-Reference & DecoderType any MS35489 number and see its other names.

Data sheets

Data sheetSpacers, bushings and grommetsThe family side by side.Data sheetAN931Grommet, Plastic (see MS35489)Data sheetNAS43Spacer, Sleeve (types DD and HT)

Buy

Distributors coming soon.

Sources

  • MS35489 — Grommet, Plastic — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close