CCR274 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Blind rivet, nutplate |
| Material | Carbon steel (SS) or corrosion resistant (CS) |
| Status | Listing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use. |
Dimensions by size
| Dimension, in | 3/32 |
|---|---|
| D — Nominal diameter, as printed | 3/32 |
Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.
Part numbers
Grip ranges and part numbers commonly stocked. The standard governs and may list others.
3/3216 part numbers
| Part no. | Material | Grip min, in | Grip max, in |
|---|---|---|---|
| CCR274-SS3-01 | Carbon steel | .046 | .062 |
| CCR274-CS3-01 | Corrosion resistant | .046 | .062 |
| CCR274-SS3-02 | Carbon steel | .063 | .125 |
| CCR274-CS3-02 | Corrosion resistant | .063 | .125 |
| CCR274-SS3-03 | Carbon steel | .126 | .187 |
| CCR274-CS3-03 | Corrosion resistant | .126 | .187 |
| CCR274-SS3-04 | Carbon steel | .188 | .250 |
| CCR274-CS3-04 | Corrosion resistant | .188 | .250 |
| CCR274-SS3-05 | Carbon steel | .251 | .312 |
| CCR274-CS3-05 | Corrosion resistant | .251 | .312 |
| CCR274-SS3-06 | Carbon steel | .313 | .375 |
| CCR274-CS3-06 | Corrosion resistant | .313 | .375 |
| CCR274-SS3-07 | Carbon steel | .376 | .437 |
| CCR274-CS3-07 | Corrosion resistant | .376 | .437 |
| CCR274-SS3-08 | Carbon steel | .438 | .500 |
| CCR274-CS3-08 | Corrosion resistant | .438 | .500 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | CCR274-<dash> |
| Example | CCR274-SS3-02 — carbon steel, 3/32 in, grip dash 02 (grip range .063-.125 in) |
Notes from the standard
- SS prefix: carbon steel; CS prefix: corrosion resistant. Then the diameter digit and the two-digit grip.
- The listing prints the column heading of this table as CCR264; it is the CCR274 universal-head table (its drawing and title say so).
- Part numbers and grip ranges are as listed in commercial listing data; combinations shown as blank or '---' there are not listed here.
- Approved data governs. Use the fastener the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- CCR274 — Cherry nutplate rivet, universal head — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.