MEK — cleaning solvent

Four solvents do most of the wiping on a sheet metal repair: MEK, acetone, isopropyl alcohol and a dry cleaning solvent. They are not interchangeable. This page says what each is for, quotes the flash points from NIOSH, and points to AC 43.13-1B for the rules. Safety lives in the SDS and the manual, not here.

View PDF

Designation

Where to buy
ItemValue
DesignationMEK
ClassChemicals
Typecleaning solvent

Data from the guide

ItemValue
SolventMEK
Flash point (NIOSH)16 F (-9 C)
Typical useCoating wipe test, thinning, cleaning
Watch forNot on nitrocellulose; not in confined spaces (AC 6-90a(14))

Flash points: CDC NIOSH Pocket Guide, Fahrenheit as published; Celsius converted. Always the SDS of your product first.

Notes from the guide

  • No procedures. The SRM and AMM name the cleaner for each task.
  • No grade numbers. The sources do not give solvent specification numbers for shop use.
  • Flash points are NIOSH values in US units; the SDS of your product may differ.

Where to buy

AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Sources

Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close