Specification
Where to buy| Item | Value |
|---|---|
| Type | Pneumatic-hydraulic riveter, CherryMAX mounting system |
| Maker | Cherry Aerospace |
| Air pressure | 90 psi (6.2 bar) min., 110 psi (7.6 bar) max. |
| Stroke | 0.510 in (12.95 mm) |
| Pulling force | 3,100 lb (13.79 kN) at 90 psi |
| Cycle time | Approximately one second |
| Item | Value |
|---|---|
| Weight | 4.25 lb (1.93 kg) |
| Noise level | 71 dB(A) |
| Vibration | Less than 2.5 m/s² |
| Air consumption | 0.16 SCF/cycle (4.53 L/cycle) in CA-1001; 3.9 CFM at 20 cycles/min in TM-G704B |
| National Stock Number | 5130-01-393-1584 |
| Military part number | M85188T2 |
Part numbers
| Part no. | Size | Item |
|---|---|---|
| G704B | Riveter | Riveter only |
| G704BCMR | Tool kit | G704B CherryMAX tool kit |
Cherry's part numbers for this tool, as the catalog lists them.
Pulling heads
| Pulling head | Type | Adapter | Rivet type | Diameters |
|---|---|---|---|---|
| H701B-456, H747-456 | Straight | — | CherryMAX, CherryMAX 'AB', MBC L/C, SST | -4, -5, -6 |
| H753A-456 | Right angle | — | CherryMAX, CherryMAX 'AB', SST | -4, -5, -6 |
| H781A-456, H782 | Offset | — | CherryMAX, CherryMAX 'AB', SST | -4, -5, -6 |
| H747-3A, -4A, -5A, -6A | Straight | — | CherryLOCK 'A' | -3, -4, -5, -6 |
| H9015-3C, -4C, -5C, -6C | Straight | 704A9 | MS and nutplate rivets | -3, -4, -5, -6 |
| H746-4MBC, -5MBC, -6MBC | Straight | — | Standard MBC | -4, -5, -6 |
| H704-()NP | Straight | — | Rivetless nutplate | — |
| H704-()NPC | Straight | — | Rivetless nutplates for composite structures | — |
Pulling heads are not furnished with the riveter. H747-456, H753A-456 and H782 can be re-configured to install -6 aluminum fasteners: see their tool sheets.
Riveter grip capability
| Fastener type | Grip |
|---|---|
| CherryMAX | All grips |
| CherryMAX 'AB' | -05 |
| CherryLOCK 'A' | -05 |
| Standard MBC and MBC L/C | 5 |
| SST | All grips |
| MS and nutplate rivets | -05 |
| MAXIBOLT, both types (U and S) | All grips |
| Rivetless nutplate | All grips |
Largest grip in one stroke. Grip capability may be extended by double stroking. MBC grip as identified by NAS1719, NAS1720 and NAS1721.
G704BCMR tool kit
| Part number | Item | Qty |
|---|---|---|
| G704B | Medium duty, single action riveter | 1 |
| H701B-456 | Straight pulling head (-4, -5 and -6 dia.) | 1 |
| H781A-456 | Offset pulling head (-4, -5 and -6 dia.) | 1 |
| H753A-456 | Right angle pulling head (-4, -5 and -6 dia.) | 1 |
| 269C3 | CherryMAX / CherryLOCK grip selector gage | 1 |
| 700A77 | Hydraulic air bleeder | 1 |
| 670A20 | Stem catcher bag | 1 |
| P-1393 | Plastic casing | 1 |
Process manuals, reference card and tool documentation are included.
Notes from the maker
- Pulling heads are not furnished with the riveter and must be ordered separately.
- TM-G704B rounds the stroke to 1/2 in. The stroke above is the catalog figure.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Fastening Systems for Aerospace Tool Catalog CA-1001, p. 4, 6, 20 — Specifications, pulling heads and part numbers.
- Cherry Aerospace, Tool Manual TM-G704B, Rev. C, 06/02/16 — Specifications, operation, pulling heads and maintenance.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.