HL11 at a glance

Specification

Item	Value
Type	Hi-Lok pin, 100° flush shear head
Material	Titanium (6AL-4V per the catalogue quick-reference chart)
Strength	95,000 psi shear min.
Status	Check the current issue before design use.

Dimension, in	8-32	10-32	1/4-28
Nominal diameter	5/32	3/16	1/4
A — Head diameter (max / min)	.2612 – .2564	.3016 – .2966	.3948 – .3898
B — Ref. (see drawing)	.312	.325	.395
TD — Threaded-end diameter (max / min)	.1595 – .1570	.1840 – .1810	.2440 – .2410
H — H (max / min, see drawing)	.041 – .039	.047 – .045	.061 – .059
Thread	8-32	10-32	1/4-28
Double shear, lb min	4,010	5,380	9,300
Tension, lb min	1,650	2,000	3,700
Dn — Shank diameter, without coating or solid film lube (max / min)	.1635 – .1630	.1895 – .1890	.2495 – .2490
Dc — Shank diameter, with coating or solid film lube (max / min)	.1635 – .1625	.1895 – .1885	.2495 – .2485

Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.

One part number per diameter. Add the grip after a second dash, in 1/16 in.

Part	Meaning
Format	HL11VAZ<dash>
Example	HL11VAZ5 — 5/32 nominal diameter; add the grip dash, e.g. HL11VAZ5-4

Titanium. The second dash number is the grip length in 1/16 in; the catalogue does not tabulate the grips of this series, so the part numbers below are the diameter prefixes.
Approved data governs. Use the pin the drawing, SRM or IPC calls for.
Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.
Collars listed for this pin in the catalogue quick-reference chart: HL70, HL79, HL82, HL94.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

HL11 — Hi-Lok Pin, 100° Flush Shear Head, Titanium — nominal sizes and part numbers.