NAS1750 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Blind bolt, internally threaded, external sleeve |
| Status | Listing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use. |
Dimensions by size
| Dimension, in | .164 | .200 |
|---|---|---|
| D — Diameter, as printed | .164 | .200 |
Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.
Part numbers
Grip ranges and part numbers commonly stocked. The standard governs and may list others.
.1647 part numbers
| Part no. | Locking | Grip min, in | Grip max, in |
|---|---|---|---|
| NAS175008L2 | Self-locking | .094 | .156 |
| NAS175008L3 | Self-locking | .157 | .217 |
| NAS175008L4 | Self-locking | .220 | .281 |
| NAS175008L5 | Self-locking | .282 | .344 |
| NAS175008L6 | Self-locking | .345 | .406 |
| NAS175008L7 | Self-locking | .407 | .469 |
| NAS175008L8 | Self-locking | .470 | .531 |
.2007 part numbers
| Part no. | Locking | Grip min, in | Grip max, in |
|---|---|---|---|
| NAS17503L2 | Self-locking | .094 | .156 |
| NAS17503L3 | Self-locking | .157 | .217 |
| NAS17503L4 | Self-locking | .220 | .281 |
| NAS17503L5 | Self-locking | .282 | .344 |
| NAS17503L6 | Self-locking | .345 | .406 |
| NAS17503L7 | Self-locking | .407 | .469 |
| NAS17503L8 | Self-locking | .470 | .531 |
Part number
What each code means
| Part | Meaning |
|---|---|
| L | Lock: Self-locking feature |
| Example | NAS17503L4 — diameter .200, self-locking, grip dash 4 (grip range .220-.281 in) |
Notes from the standard
- The first characters of the dash give the diameter (08 = .164, 3 = .200, 4 = .260); L after them marks the self-locking feature, then the grip dash.
- The listing does not state material or finish, nor the thread size.
- Part numbers are shown as the basic number followed by the dash; the listing does not show a separator, so confirm the format in the standard.
- The listing lists the same diameters, grips and dash numbers as for NAS1670 and does not state what distinguishes the two standards.
- Approved data governs. Use the fastener the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- NAS1750 — Jo-Bolt blind fastener, internally threaded, external sleeve, flush head — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.