CR3213 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Blind rivet, bulbed, structural |
| Material | Alloy steel stem; aluminum rivet (alloy not stated in the listing) |
| Status | Listing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use. |
Dimensions by size
| Dimension, in | 1/8 | 5/32 | 3/16 |
|---|---|---|---|
| D — Nominal diameter, as printed | 1/8 | 5/32 | 3/16 |
Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.
Part numbers
Grip ranges and part numbers commonly stocked. The standard governs and may list others.
1/89 part numbers
| Part no. | Grip min, in | Grip max, in |
|---|---|---|
| CR3213-4-01 | .025 | .062 |
| CR3213-4-02 | .063 | .125 |
| CR3213-4-03 | .126 | .187 |
| CR3213-4-04 | .188 | .250 |
| CR3213-4-05 | .251 | .312 |
| CR3213-4-06 | .313 | .375 |
| CR3213-4-07 | .376 | .437 |
| CR3213-4-08 | .438 | .500 |
| CR3213-4-09 | .501 | .562 |
5/3210 part numbers
| Part no. | Grip min, in | Grip max, in |
|---|---|---|
| CR3213-5-01 | .031 | .062 |
| CR3213-5-02 | .063 | .125 |
| CR3213-5-03 | .126 | .187 |
| CR3213-5-04 | .188 | .250 |
| CR3213-5-05 | .251 | .312 |
| CR3213-5-06 | .313 | .375 |
| CR3213-5-07 | .376 | .437 |
| CR3213-5-08 | .438 | .500 |
| CR3213-5-09 | .501 | .562 |
| CR3213-5-10 | .563 | .625 |
3/1611 part numbers
| Part no. | Grip min, in | Grip max, in |
|---|---|---|
| CR3213-6-01 | .037 | .062 |
| CR3213-6-02 | .063 | .125 |
| CR3213-6-03 | .126 | .187 |
| CR3213-6-04 | .188 | .250 |
| CR3213-6-05 | .251 | .312 |
| CR3213-6-06 | .313 | .375 |
| CR3213-6-07 | .376 | .437 |
| CR3213-6-08 | .438 | .500 |
| CR3213-6-09 | .501 | .562 |
| CR3213-6-11 | .563 | .625 |
| CR3213-6-12 | .626 | .687 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | CR3213-<dash> |
| Example | CR3213-4-09 — diameter dash 4 (1/8), grip dash 09 (grip range .501-.562 in) |
Notes from the standard
- Part number: basic number, diameter dash, grip dash (the first digit is the diameter, the two digits after the hyphen the grip).
- In the 3/16 group the listing prints -09, -11 and -12 for grips .501-.562, .563-.625 and .626-.687 (no -10), while CR3212 prints -10 and -11 for the last two. Rows are as printed; confirm against the manufacturer drawing.
- Part numbers and grip ranges are as listed in commercial listing data; combinations shown as blank or '---' there are not listed here.
- Approved data governs. Use the fastener the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- CR3213 — Cherrymax blind rivet, universal head, alloy steel stem, aluminum rivet — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.