Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H846A-456, Rev. B, 11-20-09 |
Part numbers
| Part no. | Size |
|---|---|
| H846A-456 | -4, -5, -6 |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryMAX bulb & wiredraw | 1/8", 5/32", 3/16" | all materials, head styles and grip lengths |
Riveters
| Riveter | Adapter |
|---|---|
| G744 | — |
| G846 | — |
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| A | 701B25 | Retaining Ring | 1 |
| B | 701B24 | Stem Stop | 2 |
| C | 846B8 | Sleeve | 1 |
| D | 642A64 | Jam Nut | 1 |
| E | 846A12 | Collet | 1 |
| F | 701B18 | Jaws (pair) | 1 set |
| G | 846A23 | Jaw Follower | 1 |
| H | 846A15 | Bumper | 1 |
| I | P964 | Spring | 1 |
Notes from the maker
- Installing: place jaws (F) in collet (E); place bumper (H) and spring (I) over jaw follower (G) and insert in collet against jaws; screw assembly onto head piston and tighten with wrenches on flats (Loctite #242 recommended); thread outer sleeve (C) with jam nut (D) into head cylinder and tighten jam nut.
- Keep pulling head clean especially around riveting end; adhesives, chips, sealants clog jaw serrations and cause stem slippage. Loctite #242 recommended on collet assembly.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H846A-456, Rev. B, 11-20-09 — CherryMAX Pulling Head
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.