AN824 at a glance

Specification

Item	Value
Type	Fitting, 37° flared tube
Material	Aluminum (D), steel (none) or corrosion-resistant steel (J)
Status	Check the current issue of the standard before design use.

Dimension, in	2	3	4	5	6	8	10	12	16
Q — Q (+3/64 / -0)	47/64	51/64	55/64	59/64	1-1/32	1-7/32	1-27/64	1-5/8	1-25/32
W — W (approx.)	5/16	3/8	3/8	15/32	1/2	11/16	25/32	29/32	1-3/32
V — V (approx.)	5/16	3/8	7/16	1/2	9/16	3/4	7/8	1-1/16	1-5/16

Dimensions as tabulated, by dash number (tube size in sixteenths of an inch).

Part no.	Size	Tube O.D., in	Thread T (ref.), UNF-3
AN824-2	1/8	1/8	5/16-24
AN824-3	3/16	3/16	3/8-24
AN824-4	1/4	1/4	7/16-20
AN824-5	5/16	5/16	1/2-20
AN824-6	3/8	3/8	9/16-18
AN824-8	1/2	1/2	3/4-16
AN824-10	5/8	5/8	7/8-14
AN824-12	3/4	3/4	1-1/16-12
AN824-16	1	1	1-5/16-12

Dash numbers with the tube size and thread; the material code goes after the dash.

Part	Meaning
Format	AN824-<dash><material>
(none)	Material: Steel
D	Material: Aluminum
J	Material: Corrosion resistant
Example	AN824-3D — aluminum, dash 3

The listing prints the thread of dash 16 as 1/5-16-12; 1-5/16-12 is given, as in the other 1-inch tube fittings of the same listing.
Dimensions in inches. Letters as on the drawing in the listing; (Ref.) values are reference dimensions.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.