HL82 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Hi-Lok collar assembly, self-aligning, shear |
| Material | Aluminum collar, stainless steel washer |
| Strength | Shear application |
| Status | Check the current issue before design use. |
Dimensions by size
| Dimension, in | 8-32UNJC-3B | 10-32UNJF-3B | 10-32UNJF-3B | 10-32UNJF-3B | 1/4-28UNJF-3B | 1/4-28UNJF-3B | 5/16-24UNJF-3B |
|---|---|---|---|---|---|---|---|
| Pin nominal diameter | 5/32 | 3/16 | 3/16 | 3/16 | 1/4 | 1/4 | 5/16 |
| A — Collar diameter (max / min) | .365 – .355 | .365 – .355 | .365 – .355 | .365 – .355 | .475 – .465 | .475 – .465 | .620 – .610 |
| B — Bore diameter (max / min) | .095 – .085 | .095 – .085 | .095 – .085 | .095 – .085 | .120 – .110 | .120 – .110 | .130 – .120 |
| M — Washer/flange diameter (max / min) | .420 – .400 | .420 – .400 | .420 – .400 | .420 – .400 | .540 – .520 | .540 – .520 | .647 – .627 |
| L — Length | .445 | .445 | .445 | .445 | .570 | .570 | .690 |
| Thread | 8-32UNJC-3B | 10-32UNJF-3B | 10-32UNJF-3B | 10-32UNJF-3B | 1/4-28UNJF-3B | 1/4-28UNJF-3B | 5/16-24UNJF-3B |
| Collar UTS, lb min | 1,400 | 1,600 | 1,600 | 1,600 | 3,000 | 3,000 | 5,000 |
| Torque-off, in-lb | 22-32 | 32-42 | 32-42 | 32-42 | 75-90 | 75-90 | 140-170 |
Dimensions as tabulated in the catalogue, by dash number (pin nominal diameter). Max – min where a tolerance is shown.
Part numbers
| Part no. | Size | Torque-off, in-lb |
|---|---|---|
| HL82-5AW | 5/32 | 22-32 |
| HL82-6APBW | 3/16 | 32-42 |
| HL82-6A | 3/16 | 32-42 |
| HL82-6AW | 3/16 | 32-42 |
| HL82-8APBW | 1/4 | 75-90 |
| HL82-8A | 1/4 | 75-90 |
| HL82-10A | 5/16 | 140-170 |
Every collar dash number listed, by pin diameter.
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | HL82-<dash> |
| Example | HL82-5AW — 5/32 nominal pin diameter |
Notes from the standard
- Catalogue note: APBW indicates a collar/washer combination with a CAD II plated washer.
- L is the minimum length (a single value in the catalogue).
- Max – min values shown as max – min. Approved data governs.
- Pins this collar is listed for in the catalogue: standard and 1/64 oversize pins (HL62-HL63).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- HL82 — Hi-Lok Collar Assembly, Self-Aligning, Shear, Aluminum Collar and Stainless Steel Washer — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.