HL110 at a glance

Specification

Item	Value
Type	Hi-Lok pin, protruding shear head, 1/64 oversize
Material	Titanium (6AL-4V per the catalogue quick-reference chart)
Strength	95,000 psi shear min.
Status	Check the current issue before design use.

Dimension, in	10-32
Nominal diameter	13/64
A — Head diameter (max / min)	.315 – .295
B — Ref. (see drawing)	.325
TD — Threaded-end diameter (max / min)	.1840 – .1810
G — G, ref.	.025
H — H (max / min, see drawing)	.055 – .045
Thread	10-32
Double shear, lb min	6,130
Tension, lb min	2,500
Dn — Shank diameter, without coating or solid film lube (max / min)	.2026 – .2021
Dc — Shank diameter, with coating or solid film lube (max / min)	.2026 – .2016

Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.

Part no.	Size
HL110VAZ6	13/64

One part number per diameter. Add the grip after a second dash, in 1/16 in.

Part	Meaning
Format	HL110VAZ<dash>
Example	HL110VAZ6 — 13/64 nominal diameter; add the grip dash, e.g. HL110VAZ6-4

Titanium. The second dash number is the grip length in 1/16 in; the catalogue does not tabulate the grips of this series, so the part numbers below are the diameter prefixes.
The -5 size is not listed for this oversize pin: the catalogue says use HL10VAZ6.
Approved data governs. Use the pin the drawing, SRM or IPC calls for.
Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.
Collars listed for this pin in the catalogue quick-reference chart: HL79, HL82, HL94.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

HL110 — Hi-Lok Pin, Protruding Shear Head, 1/64 Oversize for HL10, Titanium — nominal sizes and part numbers.