NAS1458 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Pull-type swage-locking pin (lockbolt) |
| Material | Steel, standard |
| Status | Listing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use. |
Dimensions by size
| Dimension, in | .250 |
|---|---|
| D — Diameter, as printed | .250 |
Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.
Part numbers
Grip ranges and part numbers commonly stocked. The standard governs and may list others.
.2509 part numbers
| Part no. | Max. grip, in | Grip min, in | Grip max, in |
|---|---|---|---|
| NAS1458-02 | .125 | .095 | .156 |
| NAS1458-03 | .188 | .157 | .219 |
| NAS1458-04 | .250 | .220 | .281 |
| NAS1458-05 | .312 | .282 | .344 |
| NAS1458-06 | .375 | .345 | .406 |
| NAS1458-07 | .438 | .407 | .469 |
| NAS1458-08 | .500 | .470 | .531 |
| NAS1458-09 | .562 | .532 | .592 |
| NAS1458-10 | .625 | .595 | .656 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | NAS1458-<dash> |
| Example | NAS1458-04 — grip dash 04 (grip range .220-.281 in) |
Notes from the standard
- Diameter .250 in as listed; the grip dash gives the grip range shown.
- The listing lists only the grip dash; the separator and any further characters of the full part number are not shown. Confirm the part number format in the standard.
- Used with a swage collar of the NAS1080 series (see its data sheet).
- Approved data governs. Use the fastener the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- NAS1458 — Swage-locking pin, steel, 100° head, tension, pull type, .250 dia. — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.