Specification
Where to buy| Item | Value |
|---|---|
| Type | Pneumatic C squeezer |
| Supplied with | 3 in yoke (p/n 14-7), adjustable ram (p/n 214CAR) |
| Accepts | All squeezer and dimpling sets with a .187 in shank |
| Compatible with | Chicago Pneumatic 0214-C squeezers: same yokes and attachments |
| Status | Maker's published figures, read 30 October 2026. Confirm with the maker before relying on one. |
Dimensions by size
| Dimension | ATS-114C-30 |
|---|---|
| Length | 10 in (254.0 mm) |
| Yoke | 3 in (76.2 mm) |
| Rivet capacity, aluminum or steel | 1/8 in (3.18 mm) |
| Set shank | .187 in (4.75 mm) |
Inches as published are the official values. Millimetres are converted at 25.4 mm per inch and are not official.
Part numbers
| Part no. | Size | Force | Shipping weight, lb |
|---|---|---|---|
| ATS-114C-30 | 3 in yoke | 3000 lb at 90 psi | 6 |
Model as the source lists it. Shipping weight is the page's figure for the boxed item, not the tool's own weight, which the page does not give.
Notes from the source
- ATS says it based this squeezer on the Chicago Pneumatic 0214-C, with the same power.
- The feature list gives 1/8 in aluminum or steel rivets; the description says solid aluminum or mild steel.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- ATS-114C-30 — ATS Pro Pneumatic C Squeezer (with 3 in yoke), product page — specifications as published by ATS, read 30 October 2026.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.