HL325 at a glance

Specification

Item	Value
Type	Hi-Lok pin, 100° flush shear head, interference fit
Material	Alloy steel
Strength	180,000-200,000 psi tensile
Status	Check the current issue before design use.

Dimension, in	8-32UNJC-3A Modified	10-32-UNJF-3A Modified
Nominal diameter	5/32	3/16
A — Head diameter (max / min)	.2922 – .2874	.3536 – .3486
B — Ref. (see drawing)	.312	.325
D — Shank diameter (max / min)	.1650 – .1640	.1895 – .1885
TD — Threaded-end diameter (max / min)	.1595 – .1570	.1840 – .1810
H — H (max / min, see drawing)	.0534 – .0514	.0688 – .0667
Thread	8-32UNJC-3A Modified	10-32-UNJF-3A Modified
Double shear, lb min	4,560	6,100
Tension, lb min	2,100	3,100
F — Lead-in radius (see drawing)	.004	.005
Gl — Min. grip length (dash)	-2	-3

Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.

Every part number, grouped by nominal diameter; the number after the second dash is the max grip in 1/16 in.

5/329 part numbers

3/169 part numbers

Part	Meaning
Format	HL325-<dash>
Example	HL325-5-2 — 5/32 nominal diameter, max grip 1/8 in

Interference-fit application. The catalogue gives the minimum grip length as a dash number: that dash is the shortest grip tabulated for the diameter.
Approved data governs. Use the pin the drawing, SRM or IPC calls for.
Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.
Collars listed for this pin in the catalogue quick-reference chart: HLT77.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

HL325 — Hi-Lok Pin, 100° Flush Shear Head, MS20426 Head Style, Interference Application — nominal sizes and part numbers.