The Aviation Point
The Aviation PointTechnical data sheet · theaviationpoint.com/parts/blind-fasteners/nas1465/

NAS1465 — swage-locking pin, tension, pull-type (standard and protruding head), .164

Swage-locking pin, steel, tension, pull-type (standard and protruding head), .164 dia.: nominal sizes, grip ranges and commonly stocked part numbers. Detailed dimensions come from the standard itself.

View PDF

NAS1465 at a glance

Where to buy
Photo to come
NAS1465 engineering drawing with dimensions
Engineering drawing · dimensions in inches

Specification

ItemValue
TypePull-type swage-locking pin (lockbolt)
MaterialSteel, standard
StatusListing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use.

Dimensions by size

Dimension, in.164
D — Diameter, as printed.164

Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.

Part numbers

Grip ranges and part numbers commonly stocked. The standard governs and may list others.

.1649 part numbers

Part no.Max. grip, inGrip min, inGrip max, in
NAS1465-02.125.095.156
NAS1465-03.188.157.219
NAS1465-04.250.220.281
NAS1465-05.312.282.344
NAS1465-06.375.345.406
NAS1465-07.438.407.469
NAS1465-08.500.470.531
NAS1465-09.562.532.592
NAS1465-10.625.595.656

Part number

What each code means

PartMeaning
FormatNAS1465-<dash>
ExampleNAS1465-04 — grip dash 04 (grip range .220-.281 in)

Notes from the standard

  • Diameter .164 in as listed; the grip dash gives the grip range shown.
  • The listing lists only the grip dash; the separator and any further characters of the full part number are not shown. Confirm the part number format in the standard.
  • Used with a swage collar of the NAS1080 series (see its data sheet).
  • Approved data governs. Use the fastener the SRM, drawing or IPC calls for.

Where to buy

AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Keep going

Calculators

CalculatorCherryMAX Grip SelectorPick the CherryMAX grip number for a measured stackCalculatorCherry Pulling Head SelectorWhich Cherry pulling head installs your blind rivet on your riveter, straight, right angle or…CalculatorPart number cross-referenceType any NAS1465 number and see its other names.CalculatorWhat Drill or Reamer for This Part Number?Type a rivet, CherryMAX, CherryLOCK or Hi-Lok number

Guides

GuideBlind fastenersWhen a blind rivet may replace a solid rivet in an aircraft repair, where it is prohibited…ChartHi-Lok and CherryMAX gripGrip number against stack thickness for Hi-Lok pins and CherryMAX rivets in inches and…ChartFastener cross-referenceFrequent fastener crosses with their supersession status

How to do it

Standard practiceBlind rivetsHow to install a CherryMAX blind rivet

Tools

Buying guideCherry pulling heads and riveters: every tool sheet and manualEvery Cherry pulling head with what it installs as supplied, the riveters it fits and its…

Data sheets

Data sheetBlind fastenersThe family side by side.Data sheetNAS1458Swage-locking pin, steel, 100° head, tension, pull type, .250 dia.Data sheetNAS1466Swage-locking pin, steel, tension, pull-type (standard and protruding head), .190 dia.

Buy

Distributors coming soon.

Sources

  • NAS1465 — Swage-locking pin, steel, tension, pull-type (standard and protruding head), .164 dia. — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close