Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Weight | 0.33 lb (0.15 kg) |
| Tool sheet | TS-H83HL-6MB, Rev. A, 05/04/11 |
Part numbers
| Part no. | Size |
|---|---|
| H83HL-6MB | 3/16 in (-6) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter |
|---|---|
| 130 deg Titanium MAXIBOLT flush head (CR7774S-06) | -6 |
Riveters
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 652-030 | Collet | 1 |
| 2 | 744C76 | Jaws, -6MB | 1 |
| 3 | 652-031 | Jaw Follower | 1 |
| 4 | 652-070 | Sleeve, H83HL & H84HL | 1 |
| 5 | P-1425 | Spring, Compression | 1 |
| 6 | 652-069 | Drawbolt Adaptor | 2 |
| 7 | 652-072 | Nose Piece, -6MB | 1 |
| 8 | P-1440 | Dowel Pin | 1 |
| 9 | 652-077 | Preload Sleeve (H83HL-6MB) | 1 |
| 10 | 652-075 | Retainer Washer | 1 |
| 11 | P-1438 | Polyurethane Spring | 1 |
| 12 | 652-074 | Load Adjustment Nut | 1 |
Notes from the maker
- Assemble collet assembly (items 1-6) and sleeve assembly (items 4,7-12) per exploded view; press dowel pin (8) to collet; rotate retainer washer out of alignment to keep dowel pin engaged.
- If preload not properly tightened the preload element loses effectiveness.
- Clean insert, jaws and jaw cavity every 1,000 installations or on failure; lubricate jaws with Lubriplate or similar; Loctite 242 on threaded elements; grease tapered area of jaws; thread load adjustment nut (12) hand tight against polyurethane spring (11) with a wrench; to increase preload tighten nut (12); do not over-tighten, nut snug against spring (11).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H83HL-6MB, Rev. A, 05/04/11 — Pulling Head for -6 Dia 130 deg MAXIBOLT Titanium Flush Head
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.