Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Weight | 0.15 lb (0.07 kg) |
| Tool sheet | TS-H747-6A, 11/10/16 |
Part numbers
| Part no. | Size |
|---|---|
| H747-6A | 3/16 in (-6) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| CherryLOCK 'A' Code | 6 | 6 diameter only |
Riveters
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 886-006 | Nosepiece, 6 dia A Code | 1 |
| 2 | 800-033 | Sleeve | 1 |
| 3 | 671A16 | Jam Nut | 1 |
| 4 | 753A13A | Collet | 1 |
| 5 | 782-010 | Jaw Set (see table 1) | 1 |
| 6 | 886-002 | Jaw Follower | 1 |
| 7 | 800-032 | Drawbar | 1 |
| 8 | P-1483 | Compression Spring | 1 |
Notes from the maker
- Clean and inspect nosepiece, jaws, collet & spring every 1000 installations or whenever a failure occurs; replace spring and jaws if worn. Lubricate outside of jaws with Lubriplate or similar light grease. Loctite 242 (removable) on all threaded components except as shown (do not apply on marked threads).
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H747-6A, 11/10/16 — Pulling Head for 6 diameter A Code CherryLOCK
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.