Specification
Where to buy| Item | Value |
|---|---|
| Type | Compound action aviation snips |
| Material | Precision high strength cast blades |
| Maker | Crescent Wiss |
| Capacity | 18 gauge low carbon steel |
| Overall length | 9.75 in (247.65 mm) |
| Overall width | 1.115 in (28.32 mm) |
| Item | Value |
|---|---|
| Overall height | 3.1 in (78.74 mm) |
| Cut type | Serrated |
| Handle | Single material non-slip, color coded |
| Made in | USA |
| Warranty | Full lifetime |
Part numbers
| Part no. | Size | Direction of cut | Handle | Blade length, in (mm) | Weight | UPC |
|---|---|---|---|---|---|---|
| M1R | Left and straight | Left, straight | Red | 1.38 (35.05) | 1.00 lb | 037103580122 |
| M2R | Right and straight | Right, straight | Green | 1.38 (35.05) | 1.00 lb | 037103580184 |
| M3R | Left, right and straight | Left, right, straight | Yellow | 1.5 (38.1) | 1.00 lb | 037103580214 |
| M123R | Set of three | M1R, M2R and M3R | Color coded | — | 3.00 lb | 037103239464 |
As the maker lists them. Inches are the maker's figures and are official; millimetres in brackets are converted (inches × 25.4) and are not official.
Notes from the maker
- Tested up to 500,000 cuts, as stated on the maker's pages.
- The capacity is for low carbon steel. The maker's pages give no figure for aluminum or stainless.
- The catalog listing linked to this sheet (a three piece set) does not name the maker. It is the same type, not a confirmed Wiss set, and the figures here apply only to the part numbers on this sheet.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Crescent Tools, M123R 3 Piece Compound Action Aviation Snip Set — Set contents, dimensions, capacity, weight and UPC.
- Crescent Tools, M1R — Direction of cut, blade length, handle, weight, UPC.
- Crescent Tools, M2R — Direction of cut, blade length, handle, weight, UPC.
- Crescent Tools, M3R — Direction of cut, blade length, handle, weight, UPC.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.