AN844 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Fitting, elbow 45°, pipe to hose |
| Status | Check the current issue of the standard before design use. |
Dimensions by size
| Dimension, in | -4 | -6 | -8 | -10 | -12 | -16 |
|---|---|---|---|---|---|---|
| OD — Hose I.D. | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 |
| P — Pipe thread (NPT) | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 3/4 |
| B — B | 5/8 | 7/8 | 59/64 | 1-5/32 | 1-13/64 | 1-13/64 |
| C — C | 7/16 | 5/8 | 3/4 | 15/16 | 1-1/8 | 1-1/8 |
| M — M | 1-5/8 | 1-11/16 | 1-23/32 | 1-25/32 | 1-13/16 | 1-13/16 |
Dimensions in inches as tabulated in the catalogue listing; the standard governs. Blank cells: not stated in the listing.
Part numbers
| Part no. | Size | Hose I.D., in | Pipe thread |
|---|---|---|---|
| AN844-4 | 1/4 | 1/4 | 1/8 |
| AN844-6 | 3/8 | 3/8 | 1/4 |
| AN844-8 | 1/2 | 1/2 | 3/8 |
| AN844-10 | 5/8 | 5/8 | 1/2 |
| AN844-12 | 3/4 | 3/4 | 3/4 |
| AN844-16 | 1 | 1 | 3/4 |
Part numbers as listed. The standard governs and may list other sizes.
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | AN844-<dash><material> |
| D | Material: Aluminum |
| (none) | Material: Copper alloy |
| S | Material: Steel |
| Example | AN844-4 — Copper alloy, 1/4 in hose |
Notes from the standard
- The catalogue prints header tolerances (+3/64 / -0); they are not assigned to a column here, take them from the standard.
- -12 and -16 share the same cells in the listing; repeated on each row.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- AN844 — Elbow, Pipe to Hose, 45° — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.