HL22 at a glance

Specification

Item	Value
Type	Hi-Lok pin, protruding shear head, aluminum
Material	Aluminum alloy (7075-T6 per the catalogue quick-reference chart)
Strength	45,000 psi shear strength
Status	Check the current issue before design use.

Dimension, in	8-32UNJC-3A Modified	10-32-UNJF-3A Modified
Nominal diameter	5/32	3/16
A — Head diameter (max / min)	.262 – .242	.315 – .295
B — Ref. (see drawing)	.312	.325
D — Shank diameter (max / min)	.1635 – .1625	.1895 – .1885
TD — Threaded-end diameter (max / min)	.1595 – .1570	.1840 – .1810
G — G, ref.	.030	.035
H — H (max / min, see drawing)	.060 – .045	.074 – .055
Thread	8-32UNJC-3A Modified	10-32-UNJF-3A Modified
Double shear, lb min	1,760	2,540
Tension, lb min	940	1,240

Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.

Every part number, grouped by nominal diameter; the number after the second dash is the max grip in 1/16 in.

5/329 part numbers

3/169 part numbers

Part	Meaning
Format	HL22-<dash>
Example	HL22-5-2 — 5/32 nominal diameter, max grip 1/8 in

1/16 in grip variation.
Approved data governs. Use the pin the drawing, SRM or IPC calls for.
Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.
Collars listed for this pin in the catalogue quick-reference chart: HL77.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

HL22 — Hi-Lok Pin, Protruding Shear Head, Aluminum Alloy — nominal sizes and part numbers.