NAS1919 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Blind rivet, bulbed, Monel |
| Material | Monel |
| Status | Listing data: sizes and part numbers commonly stocked. The standard or manufacturer drawing governs; check its current issue before design use. |
Dimensions by size
| Dimension, in | .125 | .156 |
|---|---|---|
| D — Diameter, as printed | .125 | .156 |
Nominal diameters as listed. Dimensions not given there are not stated here; take them from the standard.
Part numbers
Grip ranges and part numbers commonly stocked. The standard governs and may list others.
.1258 part numbers
| Part no. | Tooling | Grip min, in | Grip max, in |
|---|---|---|---|
| NAS1919M04-02 | Standard | .063 | .125 |
| NAS1919M04-03 | Standard | .126 | .187 |
| NAS1919M04-04 | Standard | .188 | .250 |
| NAS1919M04-05 | Standard | .251 | .312 |
| NAS1919M04S02 | Single action tooling | .063 | .125 |
| NAS1919M04S03 | Single action tooling | .126 | .187 |
| NAS1919M04S04 | Single action tooling | .188 | .250 |
| NAS1919M04S05 | Single action tooling | .251 | .312 |
.1568 part numbers
| Part no. | Tooling | Grip min, in | Grip max, in |
|---|---|---|---|
| NAS1919M05-02 | Standard | .080 | .125 |
| NAS1919M05-03 | Standard | .126 | .187 |
| NAS1919M05-04 | Standard | .188 | .250 |
| NAS1919M05-05 | Standard | .251 | .312 |
| NAS1919M05S02 | Single action tooling | .080 | .125 |
| NAS1919M05S03 | Single action tooling | .126 | .187 |
| NAS1919M05S04 | Single action tooling | .188 | .250 |
| NAS1919M05S05 | Single action tooling | .251 | .312 |
Part number
What each code means
| Part | Meaning |
|---|---|
| - | Tool: No S: standard tooling |
| S | Tool: Single action, non-shifting tooling |
| Example | NAS1919M04-03 — diameter .125, grip dash 03 (grip range .126-.187 in) |
Notes from the standard
- M04 = .125 diameter, M05 = .156 diameter; S after it marks a rivet for single action, non-shifting tooling. The last two digits are the grip dash.
- The listing heading names '100° flush head' for NAS1919 and NAS1921 together; its drawing shows a protruding head on NAS1921.
- Approved data governs. Use the fastener the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- NAS1919 — Blind rivet, 100° flush head, bulbed, Monel, mechanically-locked spindle — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.