HL220 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Hi-Lok pin, protruding tension head, 1/32 oversize |
| Material | Alloy steel |
| Strength | 95,000 psi shear; 160,000-180,000 psi tensile |
| Status | Check the current issue before design use. |
Dimensions by size
| Dimension, in | 10-32-UNJF-3A Modified | 1/4-28UNJF-3A Modified |
|---|---|---|
| Nominal diameter | 7/32 | 9/32 |
| A — Head diameter (max / min) | .390 – .370 | .460 – .435 |
| B — Ref. (see drawing) | .325 | .395 |
| D — Shank diameter (max / min) | .2182 – .2172 | .2807 – .2797 |
| TD — Threaded-end diameter (max / min) | .1840 – .1810 | .2440 – .2410 |
| G — G, ref. | .035 | .045 |
| H — H (max / min, see drawing) | .074 – .064 | .090 – .077 |
| Thread | 10-32-UNJF-3A Modified | 1/4-28UNJF-3A Modified |
| Double shear, lb min | 7,100 | 11,800 |
| Tension, lb min | 3,180 | 5,820 |
Dimensions as tabulated in the catalogue, by first dash number (nominal diameter). Max – min where a tolerance is shown.
Part numbers
Every part number, grouped by nominal diameter; the number after the second dash is the max grip in 1/16 in.
7/3210 part numbers
| Part no. | Max grip, in |
|---|---|
| HL220-6-3 | 3/16 |
| HL220-6-4 | 1/4 |
| HL220-6-5 | 5/16 |
| HL220-6-6 | 3/8 |
| HL220-6-7 | 7/16 |
| HL220-6-8 | 1/2 |
| HL220-6-9 | 9/16 |
| HL220-6-10 | 5/8 |
| HL220-6-11 | 11/16 |
| HL220-6-12 | 3/4 |
9/3210 part numbers
| Part no. | Max grip, in |
|---|---|
| HL220-8-3 | 3/16 |
| HL220-8-4 | 1/4 |
| HL220-8-5 | 5/16 |
| HL220-8-6 | 3/8 |
| HL220-8-7 | 7/16 |
| HL220-8-8 | 1/2 |
| HL220-8-9 | 9/16 |
| HL220-8-10 | 5/8 |
| HL220-8-11 | 11/16 |
| HL220-8-12 | 3/4 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | HL220-<dash> |
| Example | HL220-6-3 — 7/32 nominal diameter, max grip 3/16 in |
Notes from the standard
- The -5 size is not listed for this oversize pin: the catalogue says use HL64PB6.
- Approved data governs. Use the pin the drawing, SRM or IPC calls for.
- Grip: the number after the second dash is the max grip in 1/16 in (dash -2 = 1/8 in, -3 = 3/16 in, and so on). Maximum-minimum values are shown as max – min.
- Collars listed for this pin in the catalogue quick-reference chart: HL93.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- HL220 — Hi-Lok Pin, Protruding Tension Head, 1/32 Oversize for HL20, Alloy Steel — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.