Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H744MB, Rev. C, 08/20/07 |
Part numbers
| Part no. | Size |
|---|---|
| H744-5MB | 5/32 in (-5) |
| H744-6MB | 3/16 in (-6) |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter | Note |
|---|---|---|
| MAXIBOLT 'S' type (Alloy Steel and A-286 Stainless) | 5, 6 | 5/32 and 3/16 diameter, all grip lengths; H744-5MB / H744-6MB |
Riveters
Reconfiguration: nosepiece, jaws and follower
| Fastener | Dia. | Nosepiece | Jaws | Jaw follower | Note |
|---|---|---|---|---|---|
| MAXIBOLT 'S' type 5/32 | 5 | 744B65-5 | 744C75 | 744A53 | assembly H744-5MB |
| MAXIBOLT 'S' type 3/16 | 6 | 744B65-6 | 744C76 | 744A53 | assembly H744-6MB |
| MAXIBOLT 'U' type (blind bolt) 5/32 | 5 | 530-203-5 | replace nosepiece for 'U' type to seat lock collar properly | ||
| MAXIBOLT 'U' type (blind bolt) 3/16 | 6 | 530-203-6 | replace nosepiece for 'U' type |
Change these parts to install the other fasteners.
Parts list
Notes from the maker
- Stem through feed. Because of different requirements of 'S' and 'U' type blind bolts, nosepiece must be replaced to install 'U' type blind bolts (530-203-5 for 5/32 'U'; 530-203-6 for 3/16 'U').
- Lightly lubricate jaws with Lubriplate No. 630A or equivalent. Nosepiece replaceable: use arbor press and brass punch to remove, press new one into sleeve.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H744MB, Rev. C, 08/20/07 — Straight Pulling Head (Stem Through Feed) for MAXIBOLT
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.