NAS1474 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Nutplate, two lug, floating, capped, reduced rivet spacing |
| Status | Check the current issue before design use. |
Dimensions by size
| Dimension, in | 6-32 | 8-32 | 10-32 | 1/4-28 |
|---|---|---|---|---|
| A — Overall length, max | .840 | .840 | .840 | 1.000 |
| B — Overall width, max | .443 | .443 | .443 | .635 |
| C — Rivet-hole dimension, max (see drawing) | .295 | .295 | .295 | .376 |
| J — Rivet spacing, max (see drawing) | .590 | .590 | .590 | .752 |
| Thread | 6-32 | 8-32 | 10-32 | 1/4-28 |
| Height, max | .405 | .405 | .405 | .560 |
Dimensions as tabulated in the catalogue; every value is a maximum unless marked.
Part numbers
| Part no. | Size | Height, max |
|---|---|---|
| NAS1474A06 | 6-32 | .405 |
| NAS1474A08 | 8-32 | .405 |
| NAS1474C08 | 8-32 | .405 |
| NAS1474A3 | 10-32 | .405 |
| NAS1474C3 | 10-32 | .405 |
| NAS1474A4 | 1/4-28 | .560 |
| NAS1474C4 | 1/4-28 | .560 |
Every part number listed, by thread size.
Part number
What each code means
| Part | Meaning |
|---|---|
| Example | NAS1474A06 — 6-32 thread, prefix A |
Notes from the standard
- The catalogue prints two part-number columns under the standard number (prefix A and prefix C) and does not say what separates them; the standard defines the difference.
- Approved data governs. Use the nutplate the drawing, SRM or IPC calls for.
- No C-prefix part number is listed for the 6-32 size.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- NAS1474 — Nutplate, Two Lug, Floating, Capped, Reduced Rivet Spacing — nominal sizes and part numbers.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.