Specification
Where to buy| Item | Value |
|---|---|
| Type | Straight pulling head |
| Maker | Cherry Aerospace |
| Tool sheet | TS-H747-10GS, Rev. C, 09/18/08 |
Part numbers
| Part no. | Size |
|---|---|
| H747-10GS | Pulling head |
Cherry's part numbers on this tool sheet.
What it installs as supplied
| Fastener | Diameter |
|---|---|
| #10-32 grounding stud | #10-32 |
Riveters
Parts list
| Item | Part number | Description | Qty |
|---|---|---|---|
| 1 | 747-039 | Nosepiece, H-747-10GS | 1 |
| 2 | 747-043 | Sleeve, H-747-10GS | 1 |
| 3 | 747-041 | Collet, H-747-10GS | 1 |
| 4 | 743B54 | Jaws, set of 3 | 1 |
| 5 | 747-040 | Follower, jaw | 1 |
| 6 | P-1423 | Spring, compression | 1 |
| 7 | 747-042 | Drawbar | 1 |
| 8 | 671A16 | Nut, 3/4-20UNEF | 1 |
| 9 | P-1271 | Spring | 1 |
Notes from the maker
- Secure threads with Loctite 242 or equivalent. Apply Lubriplate 630 or equivalent sparingly to the taper angle of the jaws.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- Cherry Aerospace, Tool Sheet TS-H747-10GS, Rev. C, 09/18/08 — Pulling Head (#10-32 Grounding Stud) for G747 or G704B Riveters
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.