AN6230 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | O-ring gasket, hydraulic |
| Material | MIL-P-5516, class B |
| Compound specification | MIL-P-5516 |
| Status | Inactive for new design; after 13 July 1981 use MS28775. Check the current issue before design use. |
Part numbers
| Part no. | Size | Nominal OD | Nominal W | ID, actual | W, actual | Note |
|---|---|---|---|---|---|---|
| AN6230-1 | 1-5/8 | 1-7/8 | 1/8 | 1.609 ±.010 | .139 ±.004 | — |
| AN6230-2 | 1-3/4 | 2 | 1/8 | 1.734 ±.010 | .139 ±.004 | — |
| AN6230-3 | 1-7/8 | 2-1/8 | 1/8 | 1.859 ±.010 | .139 ±.004 | — |
| AN6230-4 | 2 | 2-1/4 | 1/8 | 1.984 ±.010 | .139 ±.004 | — |
| AN6230-5 | 2-1/8 | 2-3/8 | 1/8 | 2.109 ±.010 | .139 ±.004 | — |
| AN6230-6 | 2-1/4 | 2-1/2 | 1/8 | 2.234 ±.010 | .139 ±.004 | — |
| AN6230-7 | 2-3/8 | 2-5/8 | 1/8 | 2.359 ±.010 | .139 ±.004 | — |
| AN6230-8 | 2-1/2 | 2-3/4 | 1/8 | 2.484 ±.010 | .139 ±.004 | — |
| AN6230-9 | 2-5/8 | 2-7/8 | 1/8 | 2.609 ±.010 | .139 ±.004 | — |
| AN6230-10 | 2-3/4 | 3 | 1/8 | 2.734 ±.015 | .139 ±.004 | — |
| AN6230-11 | 2-7/8 | 3-1/8 | 1/8 | 2.859 ±.015 | .139 ±.004 | — |
| AN6230-12 | 3 | 3-1/4 | 1/8 | 2.984 ±.015 | .139 ±.004 | — |
| AN6230-13 | 3-1/8 | 3-3/8 | 1/8 | 3.109 ±.015 | .139 ±.004 | — |
| AN6230-14 | 3-1/4 | 3-1/2 | 1/8 | 3.234 ±.015 | .139 ±.004 | — |
| AN6230-15 | 3-3/8 | 3-5/8 | 1/8 | 3.359 ±.015 | .139 ±.004 | — |
| AN6230-16 | 3-1/2 | 3-3/4 | 1/8 | 3.484 ±.015 | .139 ±.004 | — |
| AN6230-17 | 3-5/8 | 3-7/8 | 1/8 | 3.609 ±.015 | .139 ±.004 | — |
| AN6230-18 | 3-3/4 | 4 | 1/8 | 3.734 ±.015 | .139 ±.004 | — |
| AN6230-19 | 3-7/8 | 4-1/8 | 1/8 | 3.859 ±.015 | .139 ±.004 | — |
| AN6230-20 | 4 | 4-1/4 | 1/8 | 3.984 ±.015 | .139 ±.004 | — |
| AN6230-21 | 4-1/8 | 4-3/8 | 1/8 | 4.109 ±.015 | .139 ±.004 | — |
| AN6230-22 | 4-1/4 | 4-1/2 | 1/8 | 4.234 ±.015 | .139 ±.004 | — |
| AN6230-23 | 4-3/8 | 4-5/8 | 1/8 | 4.359 ±.015 | .139 ±.004 | — |
| AN6230-24 | 4-1/2 | 4-3/4 | 1/8 | 4.484 ±.015 | .139 ±.004 | — |
| AN6230-25 | 4-5/8 | 4-7/8 | 1/8 | 4.609 ±.015 | .139 ±.004 | — |
| AN6230-26 | 4-3/4 | 5 | 1/8 | 4.734 ±.015 | .139 ±.004 | Inactive for design |
| AN6230-27 | 4-7/8 | 5-1/8 | 1/8 | — | .139 ±.004 | Inactive for design |
| AN6230-28 | 5 | 5-1/4 | 1/8 | 4.984 ±.015 | .139 ±.004 | Inactive for design |
| AN6230-29 | 5-1/8 | 5-3/8 | 1/8 | 5.109 ±.023 | .139 ±.004 | Inactive for design |
| AN6230-30 | 5-1/4 | 5-1/2 | — | — | .139 ±.004 | Inactive for design |
| AN6230-31 | 5-3/8 | 5-5/8 | 1/8 | 5.359 ±.023 | .139 ±.004 | Inactive for design |
| AN6230-32 | 5-1/2 | 5-3/4 | 1/8 | — | .139 ±.004 | Inactive for design |
| AN6230-33 | — | 5-7/8 | 1/8 | 5.609 ±.023 | .139 ±.004 | Inactive for design |
| AN6230-34 | — | 6 | 1/8 | 5.734 ±.023 | .139 ±.004 | Inactive for design |
| AN6230-35 | — | 6-1/8 | 1/8 | 5.859 ±.023 | — | Inactive for design |
| AN6230-36 | 6 | — | 1/8 | 5.984 ±.023 | .139 ±.004 | Inactive for design |
| AN6230-37 | 6-1/4 | — | 1/8 | 6.234 ±.023 | .139 ±.004 | Inactive for design |
| AN6230-38 | 6-1/2 | — | 1/8 | 6.484 ±.023 | — | Inactive for design |
| AN6230-39 | 6-3/4 | 7 | 1/8 | 6.734 ±.023 | — | Inactive for design |
| AN6230-40 | — | 7-1/4 | 1/8 | 6.984 ±.023 | .139 ±.004 | Inactive for design |
| AN6230-41 | 7-1/4 | 7-1/2 | 1/8 | 7.234 ±.030 | — | Inactive for design |
| AN6230-42 | 7-1/2 | 7-3/4 | 1/8 | 7.484 ±.030 | .139 ±.004 | Inactive for design |
| AN6230-43 | 7-3/4 | — | 1/8 | 7.734 ±.030 | .139 ±.004 | Inactive for design |
| AN6230-44 | 8 | 8-1/4 | 1/8 | 7.984 ±.030 | — | Inactive for design |
| AN6230-45 | — | 8-1/2 | 1/8 | 8.234 ±.030 | — | Inactive for design |
| AN6230-46 | 8-1/2 | 8-3/4 | 1/8 | 8.484 ±.030 | .139 ±.004 | Inactive for design |
| AN6230-47 | — | 9 | 1/8 | — | .139 ±.004 | Inactive for design |
| AN6230-48 | 9 | 9-1/4 | 1/8 | — | .139 ±.004 | Inactive for design |
| AN6230-49 | 9-1/4 | 9-1/2 | — | — | .139 ±.004 | Inactive for design |
| AN6230-50 | 9-1/2 | 9-3/4 | — | — | .139 ±.004 | Inactive for design |
| AN6230-51 | 9-3/4 | 10 | 1/8 | 9.734 ±.030 | .139 ±.004 | Inactive for design |
| AN6230-52 | 10 | 10-1/4 | 1/8 | — | .139 ±.004 | Inactive for design |
Every part number by dash number, with nominal and actual sizes. The standard governs.
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | AN6230-<dash> |
| Example | AN6230-1 — Gasket, nominal OD 1-7/8, nominal ID 1-5/8, material MIL-P-5516 class B |
Notes from the standard
- Dimensions in inches. Size is the nominal inside diameter; actual ID and W with their tolerances.
- Every diameter of the cross-section equals W except at the parting line, as shown on the standard's drawing (.003 max and .005 max).
- Dash numbers 26 to 52 (nominal ID 4-3/4 to 10) are inactive for design after 6 September 1949; the standard crosses them out.
- For sizes not listed, use the AN6227 packing. Installation details: MIL-P-5514.
- Approved data governs. Use the part the drawing, SRM or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Sources
- AN6230 Rev. 9, 1 Nov 1982 — Gasket, "O" Ring, Hydraulic — dimensions, part numbers and notes. Public domain, distribution unlimited.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.