AN101401-AN101500 at a glance

Specification

Item	Value
Type	Hexagon head bolt
Material	Steel AMS6322, hardness Rockwell C26-32; manufacturing specification AMS7452
Finish	Cadmium plate AMS2400
Status	Check the current issue before design use. Inactive for new design after 3 Mar 1969; no superseding standard.

Dimension, in	.4375-20 UNF-3A
Thread	.4375-20 UNF-3A
A max — A dia (shank), max	.437
A min — A dia (shank), min	.433
B max — B, max (across flats)	.627
B min — B, min (across flats)	.616
C — C, min (across corners)	.705
D — D (head height)	.250
W — W dia (bearing face, head chamfer 30°)	.625
E — E × 45°, approx (end chamfer)	.047

Dimensions in inches, from the drawing of the standard. L and K are the standard's letters; A, B, C, D, E and W are assigned on this datasheet.

Part numbers by length L, with length to full thread K. The standard governs.

.4375-20 UNF-3A50 part numbers

Each part number is one length L; K is the length to full thread (+.000 −.060). Where K shows a dash, the thread runs to the head with two imperfect threads max. Do not use unassigned part numbers.
Shank straight within .0025 FIR per inch of bolt length; thread pitch diameter concentric with the shank within .006 FIR; shank concentric with the washer face diameter and hexagon within .019 FIR.
Bearing face square with the shank within .003 FIR; head chamfer 30° to the bearing face diameter (opposite side optional); fillet under the head R .005 to .015; max 2 imperfect threads.
Thread per MIL-S-7742. Material identification per AMS2800, raised or depressed .010 max.
All parts undergo magnetic inspection per AMS2640. Break sharp edges .003 to .015 unless otherwise specified. Unless otherwise specified: linear ±.010, angular ±2°.
Approved data governs. Use the bolt the SRM, drawing or IPC calls for.

AmericaDistributor coming soonOur partner for this region is on its way

EuropeDistributor coming soonOur partner for this region is on its way

OceaniaDistributor coming soonOur partner for this region is on its way

Distributors coming soon.

Distributors coming soon.

AN101401 thru AN101500 Rev. 3, 30 Jun 1986 — Bolt — Hex Head, .4375-20 — dimensions, part numbers and notes. Public domain, distribution unlimited.

Part	Meaning
Format	AN101<dash>
Example	AN101455 — Hex head bolt, .4375-20 UNF-3A, L 6.000, K 5.188