AN101701-AN101800 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Hexagon head bolt |
| Material | Steel AMS6322, hardness Rockwell C26-32; manufacturing specification AMS7452 |
| Finish | Cadmium plate AMS2400 |
| Status | Check the current issue before design use. Inactive for new design after 3 Mar 1969; no superseding standard. |
Dimensions by size
| Dimension, in | .625-18 UNF-3A |
|---|---|
| Thread | .625-18 UNF-3A |
| A max — A dia (shank), max | .624 |
| A min — A dia (shank), min | .620 |
| B max — B, max (across flats) | .940 |
| B min — B, min (across flats) | .928 |
| C — C, min (across corners) | 1.061 |
| D — D (head height) | .344 |
| W — W dia (bearing face, head chamfer 30°) | .938 |
| E — E × 45°, approx (end chamfer) | .062 |
Dimensions in inches, from the drawing of the standard. L and K are the standard's letters; A, B, C, D, E and W are assigned on this datasheet.
Part numbers
Part numbers by length L, with length to full thread K. The standard governs.
.625-18 UNF-3A46 part numbers
| Part no. | L, in | K to full thread, in |
|---|---|---|
| AN101706 | 1.125 | .125 |
| AN101707 | 1.188 | .188 |
| AN101708 | 1.250 | .250 |
| AN101709 | 1.312 | .312 |
| AN101710 | 1.375 | .375 |
| AN101711 | 1.438 | .438 |
| AN101712 | 1.500 | .500 |
| AN101713 | 1.562 | .562 |
| AN101714 | 1.625 | .625 |
| AN101715 | 1.688 | .688 |
| AN101716 | 1.750 | .750 |
| AN101717 | 1.812 | .812 |
| AN101718 | 1.875 | .875 |
| AN101719 | 2.000 | 1.000 |
| AN101720 | 2.125 | 1.125 |
| AN101721 | 2.250 | 1.250 |
| AN101722 | 2.375 | 1.375 |
| AN101723 | 2.500 | 1.500 |
| AN101724 | 2.625 | 1.625 |
| AN101725 | 2.750 | 1.750 |
| AN101726 | 2.875 | 1.875 |
| AN101727 | 3.000 | 2.000 |
| AN101728 | 3.125 | 2.125 |
| AN101729 | 3.250 | 2.250 |
| AN101730 | 3.375 | 2.375 |
| AN101731 | 3.500 | 2.500 |
| AN101732 | 3.625 | 2.625 |
| AN101733 | 3.750 | 2.750 |
| AN101734 | 3.875 | 2.875 |
| AN101735 | 4.000 | 3.000 |
| AN101736 | 4.125 | 3.125 |
| AN101737 | 4.250 | 3.250 |
| AN101738 | 4.375 | 3.375 |
| AN101739 | 4.500 | 3.500 |
| AN101740 | 4.625 | 3.625 |
| AN101741 | 4.750 | 3.750 |
| AN101742 | 4.875 | 3.875 |
| AN101743 | 5.000 | 4.000 |
| AN101744 | 5.125 | 4.125 |
| AN101745 | 5.250 | 4.250 |
| AN101746 | 5.375 | 4.375 |
| AN101747 | 5.500 | 4.500 |
| AN101748 | 5.625 | 4.625 |
| AN101749 | 5.750 | 4.750 |
| AN101750 | 5.875 | 4.875 |
| AN101751 | 6.000 | 5.000 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | AN101<dash> |
| Example | AN101751 — Hex head bolt, .625-18 UNF-3A, L 6.000, K 5.000 |
Notes from the standard
- Each part number is one length L; K is the length to full thread (+.000 −.060). Do not use unassigned part numbers.
- Shank straight within .002 FIR per inch of bolt length; thread pitch diameter concentric with the shank within .006 FIR; shank concentric with the washer face diameter and hexagon within .028 FIR.
- Bearing face square with the shank within .003 FIR; head chamfer 30° to the bearing face diameter (opposite side optional); fillet under the head R .005 to .015; max 2 imperfect threads.
- Thread per MIL-S-7742. Material identification per AMS2800, raised or depressed .010 max.
- All parts undergo magnetic inspection per AMS2640. Break sharp edges .003 to .015 unless otherwise specified. Unless otherwise specified: linear ±.010, angular ±2°.
- Approved data governs. Use the bolt the SRM, drawing or IPC calls for.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Keep going
Calculators
Guides
How to do it
Data sheets
Books
Buy
Distributors coming soon.
Sources
- AN101701 thru AN101800 Rev. 3, 30 Jun 1986 — Bolt — Hex Head, .625-18 — dimensions, part numbers and notes. Public domain, distribution unlimited.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.