MS9105 at a glance
Where to buy
Current standard: AS9105. MS9105 is now controlled by AS9105 (MS9105B, Notice 2). The part numbers do not change: MS9105-01 is still the number on drawings, IPCs and bags, and it is the same part. Order it by that number; the current document is AS9105.
Specification
| Item | Value |
|---|---|
| Current standard | AS9105 (part numbers unchanged) |
| Type | Straight headless pin |
| Material | Corrosion-resistant steel, AMS 5688; tensile requirement waived |
| Status | Check the current issue before design use. Cancelled by Notice 2 (Sep 1998) and superseded by AS9105; the notice states the part numbers are identical. |
Dimensions by size
| Dimension, in | .0625 | .0938 | .1250 | .1875 |
|---|---|---|---|---|
| D — D dia | .0625 | .0938 | .1250 | .1875 |
| D tolerance | ±.0005 | ±.0005 | ±.0005 | ±.0005 |
| Hardness | Rockwell C47-55 or equivalent | Rockwell C45-54 or equivalent | Rockwell C42-53 or equivalent | Rockwell C38-46 or equivalent |
Dimensions in inches, as tabulated in the standard (letters as on its drawing).
Part numbers
Every part number by diameter and length. The standard governs.
.062523 part numbers
| Part no. | Length L, in (±.010) |
|---|---|
| MS9105-01 | .125 |
| MS9105-02 | .188 |
| MS9105-03 | .250 |
| MS9105-04 | .312 |
| MS9105-05 | .375 |
| MS9105-06 | .438 |
| MS9105-07 | .500 |
| MS9105-08 | .562 |
| MS9105-09 | .625 |
| MS9105-10 | .688 |
| MS9105-11 | .750 |
| MS9105-12 | .812 |
| MS9105-13 | .875 |
| MS9105-14 | .938 |
| MS9105-15 | 1.000 |
| MS9105-16 | 1.062 |
| MS9105-17 | 1.125 |
| MS9105-18 | 1.188 |
| MS9105-19 | 1.250 |
| MS9105-20 | 1.312 |
| MS9105-21 | 1.375 |
| MS9105-22 | 1.438 |
| MS9105-23 | 1.500 |
.093823 part numbers
| Part no. | Length L, in (±.010) |
|---|---|
| MS9105-26 | .125 |
| MS9105-27 | .188 |
| MS9105-28 | .250 |
| MS9105-29 | .312 |
| MS9105-30 | .375 |
| MS9105-31 | .438 |
| MS9105-32 | .500 |
| MS9105-33 | .562 |
| MS9105-34 | .625 |
| MS9105-35 | .688 |
| MS9105-36 | .750 |
| MS9105-37 | .812 |
| MS9105-38 | .875 |
| MS9105-39 | .938 |
| MS9105-40 | 1.000 |
| MS9105-41 | 1.062 |
| MS9105-42 | 1.125 |
| MS9105-43 | 1.188 |
| MS9105-44 | 1.250 |
| MS9105-45 | 1.312 |
| MS9105-46 | 1.375 |
| MS9105-47 | 1.438 |
| MS9105-48 | 1.500 |
.125023 part numbers
| Part no. | Length L, in (±.010) |
|---|---|
| MS9105-51 | .125 |
| MS9105-52 | .188 |
| MS9105-53 | .250 |
| MS9105-54 | .312 |
| MS9105-55 | .375 |
| MS9105-56 | .438 |
| MS9105-57 | .500 |
| MS9105-58 | .562 |
| MS9105-59 | .625 |
| MS9105-60 | .688 |
| MS9105-61 | .750 |
| MS9105-62 | .812 |
| MS9105-63 | .875 |
| MS9105-64 | .938 |
| MS9105-65 | 1.000 |
| MS9105-66 | 1.062 |
| MS9105-67 | 1.125 |
| MS9105-68 | 1.188 |
| MS9105-69 | 1.250 |
| MS9105-70 | 1.312 |
| MS9105-71 | 1.375 |
| MS9105-72 | 1.438 |
| MS9105-73 | 1.500 |
.187523 part numbers
| Part no. | Length L, in (±.010) |
|---|---|
| MS9105-76 | .125 |
| MS9105-77 | .188 |
| MS9105-78 | .250 |
| MS9105-79 | .312 |
| MS9105-80 | .375 |
| MS9105-81 | .438 |
| MS9105-82 | .500 |
| MS9105-83 | .562 |
| MS9105-84 | .625 |
| MS9105-85 | .688 |
| MS9105-86 | .750 |
| MS9105-87 | .812 |
| MS9105-88 | .875 |
| MS9105-89 | .938 |
| MS9105-90 | 1.000 |
| MS9105-91 | 1.062 |
| MS9105-92 | 1.125 |
| MS9105-93 | 1.188 |
| MS9105-94 | 1.250 |
| MS9105-95 | 1.312 |
| MS9105-96 | 1.375 |
| MS9105-97 | 1.438 |
| MS9105-98 | 1.500 |
Part number
What each code means
| Part | Meaning |
|---|---|
| Format | MS9105-<dash> |
| Example | MS9105-15 — .0625 diameter, length 1.000 |
Notes from the standard
- Pin straight within .001 for lengths .125 to 1.000 and within .002 for lengths 1.062 to 1.500.
- Length tolerance ±.010; diameter tolerance ±.0005.
- Identification: mark MS9105-XX and the manufacturer's identification on the container.
- Surface roughness 32 (AS291). Break sharp edges .003-.015.
- Do not use unassigned part numbers.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Keep going
Calculators
Guides
Data sheets
Books
Sources
- MS9105 Rev. B, 1 Feb 1980 — Pin, Straight, Headless, AMS 5688, Lock — dimensions, part numbers and notes. Public domain, distribution unlimited.
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.