ASNA0062 at a glance
Where to buy
Specification
| Item | Value |
|---|---|
| Type | Blind rivet, with locking collar |
| Status | Cross-only card: the partner numbers, evidence ranked, and no sizes. No source states the unit of the size digits, so each number carries the NAS1398 partner it pairs with instead of a size. |
Part numbers
Every number seen in the cross data with the NAS1398 partner it pairs with, evidence in brackets (listing = distributor listing, NSN = federal NSN record). No size is shown: no source states the unit of the size digits.
Paired with the NAS1398 series2 part numbers
| Part no. | Partner (evidence) |
|---|---|
| ASNA0062-30331 | NAS1398CW3-3 (listing) |
| ASNA0062-40411 | NAS1398D4-4 (listing) |
Part number
How to read it
| Segment | Reads as ASNA0062-30331 |
|---|---|
| ASNA0062 Standard | Blind rivet with locking collar, CherryLOCK family, partner NAS1398.Unit of the code: None: the number of the standardFrom: The standard |
| 3 Diameter | Same digit as its NAS partner: 3/32 in nominal (0.094 in · 2.381 mm, our conversion).Unit of the code: 1/32 in through the NAS partner (no source states the unit)From: Not given by the standard (no size table): read through the NAS partner NAS1398 |
| 03 Grip | Max grip 3/16 in, same digits as the NAS partner (0.188 in · 4.762 mm, our conversion).Unit of the code: 1/16 in, maximum grip, through the NAS partner (no source states the unit)From: Not given by the standard (no size table): read through the NAS partner NAS1398 |
| 31 Finish | Pairs with NAS letters CW: CW = stainless, cadmium plated (stated for NAS1398/1399)Unit of the code: A pairing code, no unitFrom: Pairing with the NAS partner's letters, as seen in the cross data |
Worked example. ASNA0062-30331 reads: ASNA0062 CherryLOCK-type blind rivet · 3 3/32 in · 03 max 3/16 in · 31 as NAS letters CW.
From a measured hole or stack to the code
- Hole and stack. No hole or grip table is printed (not given by the standard). The digits follow the NAS partner: diameter n/32 in, and grip code n holds stacks up to n/16 in; the minimum of each code is not given by the standard.
If a segment is missing
- Without the standard number the codes cannot be read: grip code 04 is 4.78–6.35 mm on ASNA0077/0078, 5.56–7.16 mm on ASNA0026/0027, 5.59–7.14 mm on ASNA0081/0082.
- All five digits are needed: 1 diameter digit, 2 grip digits and 2 material/finish digits; a shorter number cannot be read.
What each code means
| Part | Meaning |
|---|---|
| Format | ASNA0062-<dash> |
| Example | ASNA0062-30331 — Pairs with NAS1398CW3-3 (distributor listing). No size is given: no source states the unit of the size digits. |
Notes
- Part number: ASNA0062, a dash, then a diameter digit, two grip digits and two material or finish digits.
- Material and finish suffixes seen: 30 = NAS letter C (stainless), 31 = CW (stainless, cadmium plated), 20 = M (Monel), 21 = MW (Monel with cadmium W, by analogy). Others are not explained by our sources.
- The unit of the size digits is not stated by any source, so this card gives the partner number and no size. Do not size a hole from this card; use the partner's data sheet.
Where to buy
AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way
Distributors coming soon.
Keep going
Calculators
Guides
How to do it
Tools
Data sheets
Books
Buy
Distributors coming soon.
Sources
- ASNA0062 standard (ASNA series) — Codes, tables, tooling and inspection limits transcribed into the reference data of The Aviation Point. The text of the standard is not reproduced. Check the issue in force before design use.
- US federal item records (NSN) and distributor listings — Partner numbers. The evidence is named on each cross line: federal NSN record, manufacturer catalogue, or distributor listing (alternate, not identical).
Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.