The Aviation Point
The Aviation PointTechnical data sheet · theaviationpoint.com/parts/solid-rivets/an124951-an125100/

AN124951-AN125100 rivet — 100° countersunk head, corrosion resistant steel AMS 7228

AN124951 thru AN125100: solid rivet, 100° countersunk head, corrosion resistant steel. Dimensions by diameter, and every part number with its length.

View PDF

AN124951-AN125100 at a glance

Where to buy
AN124951-AN125100 engineering drawing with dimensions
Engineering drawing · dimensions in inches
Cancelled: use SAE-AS124951 thru SAE-AS125100. AN124951-AN125100 is cancelled (Cancelled by the notice of 29 Dec 1999 and superseded by SAE-AS124951 thru SAE-AS125100; the part numbers are identical.). Replacement named by the standard: SAE-AS124951 thru SAE-AS125100. The old number AN124951 still turns up on drawings and IPCs: check the replacement for each part before you order.

Specification

ItemValue
TypeSolid rivet, 100° countersunk head, corrosion resistant steel
MaterialCorrosion resistant steel, AMS 7228
FinishNone specified
StatusCancelled by the notice of 29 Dec 1999 and superseded by SAE-AS124951 thru SAE-AS125100; the part numbers are identical.

Dimensions by size

Dimension, in.062.094.125.156.188.250.312.375
DIA — DIA, shank dia (a).062.094.125.156.188.250.312.375
DIA tolerance±.001±.001+.001 / -.002+.001 / -.002+.001 / -.002±.002±.002±.002
A — A, head dia.105 +.002 / -.006.170 +.002 / -.006.216 +.002 / -.006.278 +.002 / -.006.344 +.003 / -.007.467 +.003 / -.007.555 +.003 / -.007.685 +.003 / -.007
B — B, head height (+.001 / -.003).022.036.042.055.070.095.106.134
C — C, approx. material for full head, ref.116.169.225.281.338.450.561.675
X — X, head to shank concentricity, FIR.010.010.010.015.015.020.020.020

Dimensions in inches, as tabulated in the standard (letters as on its drawing).

Part numbers

Every part number with its shank diameter and length L, as the sheet assigns them.

.0629 part numbers

Part no.Length L, in
AN124951.125
AN124952.188
AN124953.250
AN124954.312
AN124955.375
AN124956.438
AN124957.500
AN124958.562
AN124959.625

.09411 part numbers

Part no.Length L, in
AN124970.188
AN124971.250
AN124972.312
AN124973.375
AN124974.438
AN124975.500
AN124976.562
AN124977.625
AN124978.750
AN124979.875
AN1249801.000

.12514 part numbers

Part no.Length L, in
AN124989.250
AN124990.312
AN124991.375
AN124992.438
AN124993.500
AN124994.562
AN124995.625
AN124996.750
AN124997.875
AN1249981.000
AN1249991.125
AN1250001.250
AN1250011.375
AN1250021.500

.15613 part numbers

Part no.Length L, in
AN125008.312
AN125009.375
AN125010.438
AN125011.500
AN125012.562
AN125013.625
AN125014.750
AN125015.875
AN1250161.000
AN1250171.125
AN1250181.250
AN1250191.375
AN1250201.500

.18812 part numbers

Part no.Length L, in
AN125027.375
AN125028.438
AN125029.500
AN125030.562
AN125031.625
AN125032.750
AN125033.875
AN1250341.000
AN1250351.125
AN1250361.250
AN1250371.375
AN1250381.500

.25010 part numbers

Part no.Length L, in
AN125047.500
AN125048.562
AN125049.625
AN125050.750
AN125051.875
AN1250521.000
AN1250531.125
AN1250541.250
AN1250551.375
AN1250561.500

.3128 part numbers

Part no.Length L, in
AN125067.625
AN125068.750
AN125069.875
AN1250701.000
AN1250711.125
AN1250721.250
AN1250731.375
AN1250741.500

.3757 part numbers

Part no.Length L, in
AN125086.750
AN125087.875
AN1250881.000
AN1250891.125
AN1250901.250
AN1250911.375
AN1250921.500

Part number

How a AN124951-AN125100 part number is built, segment by segment

What each code means

PartMeaning
ExampleAN124951 — .062 in diameter, .125 in long

Notes from the standard

  • Head angle 100° (reference). Head edge .002 - .010. Fillet under the head .005 - .010 R.
  • (a) Shank diameter to be measured within .100 of the base of the head. The head must be concentric with the shank diameter within X FIR.
  • Linear tolerance ±.010 unless otherwise specified. Do not use unassigned part numbers.
  • Part number: each number is one diameter and one length L, as tabulated; there are no dash numbers.
  • Approved data governs. Use the rivet the SRM, drawing or IPC calls for.

Where to buy

AmericaDistributor coming soonOur partner for this region is on its way
EuropeDistributor coming soonOur partner for this region is on its way
OceaniaDistributor coming soonOur partner for this region is on its way

Distributor? Get listed →

Distributors coming soon.

Keep going

Calculators

CalculatorRivet Length CalculatorSolid rivet length calculatorCalculatorRivet Alloy & Icebox CheckIdentify a rivet's alloy from its head marking and AN code, and whether it must be kept…CalculatorRivet Shop Head InspectionCheck a driven rivet's shop head against the FAA Handbook's minimum, preferred and maximum and…CalculatorPart number cross-referenceType any AN124951-AN125100 number and see its other names.

Guides

GuideForming and heat treatmentWhich aluminium temper to form, annealing and work hardening, quench and the 212 F limit for…GuideMonel rivetsMonel solid and blind rivetsGuide7050 E rivets7050-T73 (E, KE) solid rivetsGuideSteel and CRES rivetsCarbon steel and corrosion-resistant steel solid rivets MS20613 and MS20427

How to do it

Standard practiceRivet identificationHow to identify an aircraft rivet

Tools

Tool guideRivet cuttersHow to use a rivet cutter to trim a rivet to length

Data sheets

Material2117 Aluminum2117 aluminum, the AD rivet alloyMaterial2017 Aluminum2017 aluminumMaterial5056 Aluminum5056 aluminumData sheetSolid rivetsThe family side by side.

Books

Fasteners & HardwareBookFasteners & HardwareFastener types and codes, sizes, tools and substitutes in one reference. Coming soon.

Buy

Distributors coming soon.

Sources

Educational reference only. not approved data. Always consult the applicable SRM, AMM, or AC 43.13-1B and your certifying authority.
esc
↑↓ navigate↵ openesc close